Mundorf
€15.05 IT/piece |
![]() |
Air core coil Mundorf L200, 0.18mH ±2%, 0.06ohm, Ø28xL58mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L200-0,18
L200-0,18
|
Mundorf
€25.58 IT/piece |
![]() |
Mundorf BH125 ferrite core coil, 3.9mH ±3%, 0.24ohm, 1.25mm OFC-copper wire, Ø40xH37mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH125-3,9
BH125-3,9
|
Mundorf
€9.82 IT/piece |
![]() |
Mundorf BL100 air core coil, 0.22mH ±2%, 0.21ohm, 1.00mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL100-0,22
BL100-0,22
|
Mundorf
€18.75 IT/piece |
![]() |
Mundorf BH71 ferrite core coil, 15mH ±3%, 1.15ohm, 0.71mm OFC-copper wire, Ø40xH37mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance. |
Mundorf
€31.51 IT/piece |
![]() |
Mundorf LL60 litz wire air core coil, 0.33mH ±2%, 0.14ohm, 7x0.6mm wire OFC-copper 99.99% with backed varnish wire, Ø28xL58mm
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL60-0,33
LL60-0,33
|
Mundorf
€4.02 IT/piece |
![]() |
Mundorf L50 air core coil, 0.22mH ±2%, 0.59ohm, 0.50mm OFC-copper wire, Ø25xH10mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-0,22
L50-0,22
|
Mundorf
€11.87 IT/piece |
![]() |
Mundorf BL140 air core coil, 0.12mH ±2%, 0.08ohm, 1.40mm OFC-copper wire, Ø40xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL140-0,12
BL140-0,12
|
Mundorf
€21.77 IT/piece |
![]() |
Mundorf H140 ferrite core coil, 2.2mH ±3%, 0.14ohm, 1.40mm OFC-copper wire, Ø40xH37mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H140-2,2
H140-2,2
|