PHL Audio |
3020 |
3020-8 |
Cone driver |
Sold by piece |
|
Brand PHL Audio |
Model 3020 |
TLHP code 3020-8 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 14 weeksLow midrange transducer dedicated to the reproduction of 50-4000Hz frequencies. Its design gives priority to precision in the midrange band. Noiseless natural convection Intercooling System. High compliance double half-roll Fabric Surround for low Fs. Ultra light CCAR voice coil.
General |
|
Product type | Cone driver |
Brand | PHL Audio |
Reference | 3020 |
Informations |
|
Product manufacturer range | Standard |
Nominal impedance | 8 ohm |
Dimensional category | 10 inch, 11 inch |
Frequency coverage type | Low, Midbass, Midrange |
Manufacturer sensitivity | 95 dB |
Calculated sensitivity | 94.77 dB |
Nominal power handling | 200 W |
Max power handling | 400 W |
Bandwidth | 50÷4000 Hz |
Fundamental parameters |
|
Sd | 356 cm² |
Mms | 34 gr |
Cms | 210 µm/N |
Rms | 3 kg/s |
Le | 0.43 mH |
Re | 5.3 ohm |
BL | 12.8 T.m |
Small signal parameters |
|
Fs | 60 Hz |
Qes | 0.41 |
Qms | 4.27 |
Qts | 0.38 |
Vas | 37.22 L |
Datas |
|
Xmax | ±5 mm |
Calculated Xmax | ±5.6667 mm |
Xvar, Xmech, Xlim | ±12 mm |
EBP | 146 Hz |
Zmin | 5.5 ohm |
Fs / Qts | 158 Hz |
Vas * Qts² | 5.38 L |
Efficiency | 1.9 % |
Calculated efficiency | 1.89 % |
Air volume occupied by the driver | 1.1 L |
Demodulation ring | Yes |
Dimensions |
|
Voice coil diameter | 2 inch |
Winding depth | 14 mm |
Gap height | 8 mm |
External dimensions | 254.5 | 283.5 mm |
Baffle cutout diameter | 229 mm |
Depth | 120 mm |
Front thickness | 11 mm |
Depth after front | 109 mm |
Diamètre aimant (mm) | 158 mm |
Shape & Materials |
|
Front chape | Non cylindrical |
Magnet type | Ferrite |
Basket masterial | Zamak |
Winding material | CCAR (Flat ribbon copper-clad aluminium wire) |
Voice coil former | Glass fiber |
Surround shape | Double roll |
Surround material | Cloth |
Dome material | Carbon fiber |
Cone shape | Exponential |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.