PHL Audio |
3861 |
3861-8 |
Cone driver |
Sold by piece |
|
Brand PHL Audio |
Model 3861 |
TLHP code 3861-8 |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
This product is not in stock, it will be supplied when your order is validated.
Indicative average supply lead time: 14 weeks
The 3861 replace the 3860. It is a midrange transducer dedicated to the reproduction of 120-3000Hz frequencies. Equiped with a progressive wave diaphragm for precise transcription of the mid-range band. For horn loaded application.
General |
|
Product type | Cone driver |
Brand | PHL Audio |
Reference | 3861 |
Informations |
|
Product manufacturer range | Standard |
Nominal impedance | 8 ohm |
Dimensional category | 10 inch, 11 inch |
Frequency coverage type | Midbass, Midrange |
Manufacturer sensitivity | 98 dB |
Calculated sensitivity | 97.57 dB |
Nominal power handling | 250 W |
Max power handling | 500 W |
Bandwidth | 120÷3000 Hz |
Fundamental parameters |
|
Sd | 377 cm² |
Mms | 40 gr |
Cms | 80 µm/N |
Rms | 7.2 kg/s |
Le | 0.67 mH |
Re | 5.7 ohm |
BL | 20.5 T.m |
Small signal parameters |
|
Fs | 88 Hz |
Qes | 0.3 |
Qms | 3.07 |
Qts | 0.27 |
Vas | 16.46 L |
Datas |
|
Xmax | ±2.5 mm |
Calculated Xmax | ±4.3333 mm |
Xvar, Xmech, Xlim | ±4 mm |
EBP | 293 Hz |
Zmin | 6.4 ohm |
Fs / Qts | 326 Hz |
Vas * Qts² | 1.2 L |
Efficiency | 3.65 % |
Calculated efficiency | 3.59 % |
Weight | ~8.3 kg |
Air volume occupied by the driver | 2 L |
Demodulation ring | Yes |
Recommended load volume | 5 L |
Dimensions |
|
Voice coil diameter | 3 inch |
Winding depth | 12 mm |
Gap height | 10 mm |
External dimensions | 255 | 283.5 mm |
Baffle cutout diameter | 229 mm |
Depth | 124 mm |
Front thickness | 11 mm |
Depth after front | 113 mm |
Diamètre aimant (mm) | 204 mm |
Shape & Materials |
|
Front chape | Non cylindrical |
Magnet type | Ferrite |
Basket masterial | Zamak |
Winding material | CCAR (Flat ribbon copper-clad aluminium wire) |
Voice coil former | Glass fiber |
Surround shape | Flat |
Surround material | Foam |
Dome material | Carbon fiber |
Cone shape | Exponential |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.