Audax |
HM170Z0 |
HM170Z0-8 |
100996Y |
Cone driver |
Sold by piece |
|
Brand Audax |
Model HM170Z0 |
TLHP code HM170Z0-8 |
Manufacturer code 100996Y |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 3 weeks
HD-A represents a true breakthrought in loudspeaker cone technology, surpassing all conventional materials being used today.
Through an extraordinary combination of newly developed materials and processes. Audax has created an innovative composite membrane whose properties are very close to ideal for making loudspeaker diaphragms. Ultra light, extremely rigid and maximized internal damping. This no-compromise cone ise based on a totally controlled matric of acrylic polymer gel in which an optimized proportion of Carbon and Kevlar fibers are embedded. An exclusive, proprietary process acts to perfectly align the fibers along the polymer chain. The procedure allows total control over the contour and weight of the cone, while making it possible to vary the thickness of the membrane along the profile. This 6 1/2" bass-midrange driver was developped for top range, no-compromise high end 2 or 3-way systems. It features a die cast Zamack chassis with unobstructed venting for enhanced transient response and a non resonant phase plug for high and frequency equalization. High power handling results from the flat, edgewound copper coil mounted onto a fiberglass reinforced Kpaton voice coil former. Unequaled definition is achieved over a wide spectrum of frequencies and dynamic ranges while retaining a neutral tonal balance with precise and detailed imaging.
General |
|
Product type | Cone driver |
Brand | Audax |
Reference | HM170Z0 |
Product code | 100996Y |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 6.5 inch, 7.5 inch |
Frequency coverage type | Sub, Low |
Manufacturer sensitivity | 91 dB |
Calculated sensitivity | 90.24 dB |
Nominal power handling | 60 W |
Fundamental parameters |
|
Sd | 138 cm² |
Mms | 9.9 gr |
Le | 0.34 mH |
Re | 6.2 ohm |
BL | 6 T.m |
Small signal parameters |
|
Fs | 40 Hz |
Qes | 0.42 |
Qms | 6.15 |
Qts | 0.4 |
Vas | 45.3 L |
Datas |
|
Xmax | ±3.75 mm |
Calculated Xmax | ±5.4167 mm |
EBP | 95 Hz |
Zmin | 7.4 ohm |
Fs / Qts | 100 Hz |
Vas * Qts² | 7.25 L |
Calculated efficiency | 0.67 % |
Dimensions |
|
Voice coil diameter | 1.18 inch |
Winding depth | 12.5 mm |
Gap height | 5 mm |
External dimensions | 166 | 188 mm |
Baffle cutout diameter | 145 mm |
Front thickness | 7.2 mm |
Depth after front | 70 mm |
Diamètre aimant (mm) | 86.1 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
Basket masterial | Zamak |
Winding material | Copper |
Voice coil former | Kapton |
Surround material | Rubber |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.