Coaxial speaker Oberton 8CX, 8+16 ohm, 8 inch
|
Oberton |
8CX |
8CX-8+16 |
12108F0108 |
Coaxial driver with two entries |
Sold by piece |
|
|
Brand Oberton |
Model 8CX |
TLHP code 8CX-8+16 |
Manufacturer code 12108F0108 |
||
|
Product type Coaxial driver with two entries |
Sales packaging Sold by Piece |
|
|||
This product is in the process of supply to be in stock.
Reserved on order
Next TLHP reception estimated between Jun 30, 2024 and Jul 7, 2024
-
The 8CX is a 8" / 1" coaxial transducer designed for use in compact reflex enclosures with a nominal dispersion of 100 degrees.
The low profile, smooth curvilinear LF cone provides smooth response within its intended frequency range and water prove protective coating, allowing application in a wide range of environments. The state-of-the-art 51 mm (2 in) LF voice coil has Kapton former, which together with high temperature resistant resin ensure high reliability by high power.
A double aluminium demodulating rings reduce distortion and inductance and improve transient response.
The special cone made of cellulose with carbon fibers improves waterfall response.
The 1" exit compression driver adopted is our D2544 model.
The HF driver diaphragm assembly, using triple layer polyester dome this together with phasing plug improve linearity of frequency response in high end.
Because of design with single magnet assembly the speaker has light weight and compact size.
Application: Compact reflex boxes.
KEY FEATURES :
95.5 db SPL 1W / 1m ( LF ) average sensitivity
51 mm ( 2") high temperature voice coil ( LF )
400 W AES program power ( LF )
Double aluminium demodulating rings
Single magnet assembly
Double silicone spider
Water protected cone (front)
1" exit HF compression driver
44 mm (1.75") HF high temperature voice coil
100 degrees nominal dispersion
General |
|
| Product type | Coaxial driver with two entries |
| Brand | Oberton |
| Reference | 8CX |
| Product code | 12108F0108 |
Informations |
|
| Nominal impedance | 8+16 ohm |
| Dimensional category | 8.5 inch, 9 inch |
| Manufacturer sensitivity | 95.5 dB |
| Calculated sensitivity | 94.11 dB |
| Nominal power handling | 200 | 40 W |
| Bandwidth | 70÷20000 Hz |
| Exit dimension | 1.0 inch |
Fundamental parameters |
|
| Mms | 14.52 gr |
| Le | 0.638 mH |
| Re | 5.68 ohm |
Small signal parameters |
|
| Fs | 76.07 Hz |
| Qes | 0.44 |
| Qms | 4.28 |
| Qts | 0.4 |
| Vas | 16.84 L |
Datas |
|
| Xmax | ±5.25 mm |
| EBP | 173 Hz |
| Fs / Qts | 190 Hz |
| Vas * Qts² | 2.7 L |
| Calculated efficiency | 1.62 % |
| Weight | ~4.5 kg |
| Dispersion | 100° x 100° |
Dimensions |
|
| Voice coil diameter | 2 | 1.75 inch |
| External dimensions | 210 | 225 mm |
| Baffle cutout diameter | 187 mm |
| Front thickness | 12 mm |
| Depth after front | 109 mm |
Shape & Materials |
|
| Front chape | Non cylindrical |
| Magnet type | Ferrite |
Question about Oberton 8CX-8+16
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
With Oberton 8CX-8+16, customers has also bought
Informations Oberton 8CX-8+16
The low profile, smooth curvilinear LF cone provides smooth response within its intended frequency range and water prove protective coating, allowing application in a wide range of environments. The state-of-the-art 51 mm (2 in) LF voice coil has Kapton former, which together with high temperature resistant resin ensure high reliability by high power.
A double aluminium demodulating rings reduce distortion and inductance and improve transient response.
The special cone made of cellulose with carbon fibers improves waterfall response.
The 1" exit compression driver adopted is our D2544 model.
The HF driver diaphragm assembly, using triple layer polyester dome this together with phasing plug improve linearity of frequency response in high end.
Because of design with single magnet assembly the speaker has light weight and compact size.
Application: Compact reflex boxes.
KEY FEATURES :
95.5 db SPL 1W / 1m ( LF ) average sensitivity
51 mm ( 2") high temperature voice coil ( LF )
400 W AES program power ( LF )
Double aluminium demodulating rings
Single magnet assembly
Double silicone spider
Water protected cone (front)
1" exit HF compression driver
44 mm (1.75") HF high temperature voice coil
100 degrees nominal dispersion
Name Coaxial speaker Oberton 8CX, 8+16 ohm, 8 inch
SKU 8CX-8+16
Price € 179.96 149.97 Out of stock
Buy Coaxial speaker Oberton 8CX, 8+16 ohm, 8 inch
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Measures/Schemes Oberton 8CX-8+16
SPL vs Impedance measure
Dimensions
Garantie
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.
