Eighteen Sound |
ND1020 |
ND1020-8 |
DRV101020PO08NA |
Compression driver |
Sold by piece |
|
Brand Eighteen Sound |
Model ND1020 |
TLHP code ND1020-8 |
Manufacturer code DRV101020PO08NA |
||
Product type Compression driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 11 weeks
The ND1020 1-inch exit high frequency compression driver has been designed for use in situations where the highest possible sound quality is required.
Polyethylene Naphthalate (PEN) has been used for the diaphragm assembly, giving to ND1020 a superior diaphragm dimensional stability compared to conventional Mylar film (160°C as a thermal rating compared to 105°C for PET) and maintaining a constant performance during its whole working life. PEN film, with its very high value of elasticity modulus (6000MPa compared to 4000MPa for PET and 2800MPa for polyimide film), is capable of a superior transient and intermodulation distortion response. The flat punched suspension shape has been designed to maintain low stiffness for superior low mid band distortion and response.
An edge-wound copper clad aluminum voice coil wound on treated Nomex completes the diaphragm assembly. Nomex shows a 20% higher value of tensile elongation at 200°C than the value at room temperature, (in comparison, Kapton tensile elongation is 30% lower at 200°C than the value at room temperature). Hence, Nomex is capable of keeping energy transfer from the voice coil to the dome under control, especially when the voice coil reaches high temperatures. As a plus, treated Nomex former voice coil can work well even in high moisture content environments, thanks to its very low porosity.
The ND1020 is equipped with unique Phase Plug architecture, designed to give smooth coherent wave front at the horn entrance over the whole working frequency range, as well as high level manufacturing consistency. The phase plug design shows short openings and high flare rate value, assuring low distortion and demonstrates remarkable improvements in mid-high frequency reproduction.
By carefully using elementary pieces of neodymium magnets, Eighteen Sound engineers have developed a powerful neodymium magnet assembly capable of reaching 18KGauss in the gap within a compact and lightweight structure.
108,5 dB SPL 1W / 1m average sensitivity
1 inch exit throat
34,4 mm (1 1/3 inch) voice coil diameter
Polyethylene Diaphragm
60W Program Power Handling
Compact Lightweight Neodymium Structure
Proprietary Phase Plug design
General |
|
Product type | Compression driver |
Brand | Eighteen Sound |
Reference | ND1020 |
Product code | DRV101020PO08NA |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 3.5 inch |
Manufacturer sensitivity | 108.5 dB |
Nominal power handling | 30 W |
Max power handling | 60 W |
Bandwidth | 1600÷20000 Hz |
Recommended min cutoff frequency | 1600 Hz |
Exit dimension | 1.0 inch |
Datas |
|
Zmin | 6.5 ohm |
Weight | ~0.7 kg |
Dimensions |
|
Voice coil diameter | 1.34 inch |
Outside diameter | 85 mm |
Depth | 40 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.