Speaker 18 Sound 12NW530, 8 ohm, 12 inch

Brand 
Eighteen Sound
Model 
12NW530
SKU 
12NW530-8
Manufacturer code 
ALT120530WF08NB
Product type 
Cone driver
Brand
Eighteen Sound
Model
12NW530
TLHP code
12NW530-8
Manufacturer code
ALT120530WF08NB
Product type 
Cone driver

Unavailable

  • The 12NW530 low frequency neodymium transducer has been specifically developed for high power, low distortion, very compact subwoofer applications.

    The transducer finds its main application on compact vented subwoofers as small as 40 liters. The neodymium magnet assembly developed by Eighteen Sound engineers assures high flux concentration, low power compression and excellent heat exchange, since the external magnet configuration is considerably more efficient than traditional under-pole magnet topology.
    This results in high levels of force factor and power handling with an optimum power to weight ratio. A state-of-the-art Interleaved Sandwich Voice coil (ISV) copper wire voice coil provides high levels of thermal stability and durability.
    The transducer incorporates Eighteen Sound DSS technology (Double Silicon Spider), in combination with a single roll highly damped surround, that has been designed to provide symmetric large signal behaviour throughout the whole working range, providing low harmonic distortion at different excitation levels.
    The already low distortion and sound quality are further improved by properly positioned Single Demodulating Ring (SDR), that flattens impedance and phase curves helping a constant power transfer from the amplifier.
    The deep profile curvilinear cone, created from a special high strength wood pulp, has been designed to achieve the best possible linearity.
    The humidity repellent cone treatment significantly dampens bell mode resonances. A special coating applied to both the top and back plates makes the 12NW530 far more resistant to the corrosive effects of salts and oxidization.

    96 dB SPL 1W / 1m average sensitivity
    75 mm (3 in) ISV voice coil
    500 W AES power handling
    External neodymium magnet assembly
    Double Silicon Spider (DSS) for improved excursion control and linearity
    Single Demodulating Ring (SDR) for lower distortion
    High excursion damped rubber roll surround
    Specific for compact subwoofer usage

General

Product type Cone driver
Brand Eighteen Sound
Reference 12NW530
Product code ALT120530WF08NB

Informations

Nominal impedance 8 ohm
Dimensional category 12.5 inch
Frequency coverage type Low, Midbass, Midrange
Manufacturer sensitivity 96 dB
Calculated sensitivity 93.82 dB
Nominal power handling 500 W
Max power handling 800 W
Bandwidth 48÷3200 Hz

Fundamental parameters

Sd 530 cm²
Mms 93 gr
Cms 91 µm/N
Le 0.9 mH
Re 4.9 ohm
BL 19.7 T.m

Small signal parameters

Fs 55 Hz
Qes 0.38
Qms 9.7
Qts 0.37
Vas 36 L

Datas

Xmax ±8 mm
EBP 145 Hz
Zmin 6.3 ohm
Fs / Qts 149 Hz
Vas * Qts² 4.93 L
Calculated efficiency 1.52 %
Weight ~4 kg

Dimensions

Voice coil diameter 3 inch
Outside diameter 315 mm
Baffle cutout diameter 282 mm
Depth 136 mm
Front thickness 11 mm
Depth after front 125 mm

Shape & Materials

Front chape Cylindrical
Magnet type Neodymium


Question about Eighteen Sound 12NW530-8

Ask a new question!

This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.


Informations Eighteen Sound 12NW530-8

The 12NW530 low frequency neodymium transducer has been specifically developed for high power, low distortion, very compact subwoofer applications.

The transducer finds its main application on compact vented subwoofers as small as 40 liters. The neodymium magnet assembly developed by Eighteen Sound engineers assures high flux concentration, low power compression and excellent heat exchange, since the external magnet configuration is considerably more efficient than traditional under-pole magnet topology.
This results in high levels of force factor and power handling with an optimum power to weight ratio. A state-of-the-art Interleaved Sandwich Voice coil (ISV) copper wire voice coil provides high levels of thermal stability and durability.
The transducer incorporates Eighteen Sound DSS technology (Double Silicon Spider), in combination with a single roll highly damped surround, that has been designed to provide symmetric large signal behaviour throughout the whole working range, providing low harmonic distortion at different excitation levels.
The already low distortion and sound quality are further improved by properly positioned Single Demodulating Ring (SDR), that flattens impedance and phase curves helping a constant power transfer from the amplifier.
The deep profile curvilinear cone, created from a special high strength wood pulp, has been designed to achieve the best possible linearity.
The humidity repellent cone treatment significantly dampens bell mode resonances. A special coating applied to both the top and back plates makes the 12NW530 far more resistant to the corrosive effects of salts and oxidization.

96 dB SPL 1W / 1m average sensitivity
75 mm (3 in) ISV voice coil
500 W AES power handling
External neodymium magnet assembly
Double Silicon Spider (DSS) for improved excursion control and linearity
Single Demodulating Ring (SDR) for lower distortion
High excursion damped rubber roll surround
Specific for compact subwoofer usage

All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.

Measures/Schemes Eighteen Sound 12NW530-8

SPL measure *

Image spl measure cone driver Eighteen Sound Speaker 18 Sound 12NW530, 8 ohm, 12 inch

* Frequency response curve of 12NW530 made on 50 lit. enclosure tuned @ 60hz in free field (4π) environment. Enclosure closes the rear of the driver. The thin line represents the 45 deg. off axis frequency response.


Impedance measure *

Image impedance measure cone driver Eighteen Sound Speaker 18 Sound 12NW530, 8 ohm, 12 inch

* Free air impedance magnitude curve.


Dimensions

Image Drawing & Mounting (1/2) cone driver Eighteen Sound Speaker 18 Sound 12NW530, 8 ohm, 12 inch
Image Drawing & Mounting (2/2) cone driver Eighteen Sound Speaker 18 Sound 12NW530, 8 ohm, 12 inch
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x
This site uses cookies. By continuing to browse this site you are agreeing to our use of cookies. Find out more here.
x