Speaker SB Acoustics Satori MW16P-8, impedance 8 ohm, 6.5 inch
|
SB Acoustics |
SATORI_MW16P-8 |
Cone driver |
Sold by Piece |
|
|
Brand SB Acoustics |
TLHP code SATORI_MW16P-8 |
||
|
Product type Cone driver |
Sales packaging Sold by Piece |
|
|
Reserved on order
Indicative average supply lead time: 27 days
Sign up to get notified when this product is back in stock
-
Vented aerodynamic cast aluminium chassis for optimum strength and low compression
Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house
Soft low damping rubber surround for optimum transient response
Advanced BIMAX spider for improved linearity
Powerful optimized low distortion neodymium motor system
Non-conducting fibre glass voice coil former for minimum damping
Extended copper sleeve on pole piece for low inductance and reduced distortion
CCAW voice coil for reduced moving mass
Long life silver lead wires attached 180° apart for improved stability
Vented pole piece and coil former for reduced compression
High piston to chassis diameter ratio
Gasket and bolt hole protrusions for reduced coupling to speaker cabinet - Cone driver
- SB Acoustics
- Satori, Midwoofer, 6.5 inch
- Sub
- 6.5 inch
- 165 mm
- 140.1 mm
- Neodymium
- Aluminium
- 8 ohm
- 60 W
- 120 W
- 87.5 dB
- 87.09 dB
- 1.42 inch
- CCAW (Copper-clad aluminium wire)
- Glass fiber
- 17 mm
- 5 mm
- 1.17 T
- 75.6 mm
- 7.5 mm
- 70 mm
- 1.01 kg
- 29 Hz
... Display more
Question about SB Acoustics SATORI_MW16P-8
Ask a new question!This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page of the website or following the procedure described on this page if it is a quote request.
SB Acoustics SATORI_MW16P-8, Range, version, replacement...
This product list is manually managed by the TLHP team based on its experience and product knowledge.
Use SB Acoustics SATORI_MW16P-8
|
|
This product list is manually managed by the TLHP team based on its experience and product knowledge.
With SB Acoustics SATORI_MW16P-8, customers has also bought
This product list is automatically generated following the purchases from others customers.
Informations SB Acoustics SATORI_MW16P-8
Proprietary cone material with EGYPTIAN PAPYRUS™ fibres made in-house
Soft low damping rubber surround for optimum transient response
Advanced BIMAX spider for improved linearity
Powerful optimized low distortion neodymium motor system
Non-conducting fibre glass voice coil former for minimum damping
Extended copper sleeve on pole piece for low inductance and reduced distortion
CCAW voice coil for reduced moving mass
Long life silver lead wires attached 180° apart for improved stability
Vented pole piece and coil former for reduced compression
High piston to chassis diameter ratio
Gasket and bolt hole protrusions for reduced coupling to speaker cabinet
Name Speaker SB Acoustics Satori MW16P-8, impedance 8 ohm, 6.5 inch
SKU SATORI_MW16P-8
Price € 136.60 113.83 Out of stock
Buy Speaker SB Acoustics Satori MW16P-8, impedance 8 ohm, 6.5 inch
Product type Cone driver
Datasheet Internal link SB Acoustics
Transport weight 1.14 kg
Transport volume weight 0.81 kg
All or a part of the characteristics displayed on this page are provided by the manufacturer, it is possible that some pieces of information are unavailable or wrong. In addition, the manufacturer may need to change the product specifications without notice at any time in order to improve the product, or to adapt his offer to the manufacturing and supply constraints.. We suggest you to contact us if you need further information, if you observe a mistake or if you wish to have confirmation about information.
Review SB Acoustics SATORI_MW16P-8
- By Lars le 2/13/21 au sujet de Speaker SB Acoustics Satori MW16P-8, impedance 8 ohm, 6.5 inch
-
Note: 5/5 Commentaire: Bought these to replace worn midrange elements in my Sonab OA116. Have not installed them yet so cannot offer any opinion about these. Service from TLHP was exemplary. Very fast delivery with DHL and speakers very well packed. Merci !Price Quality
Supply SB Acoustics SATORI_MW16P-8
More information about supply.
Measures/Schemes SB Acoustics SATORI_MW16P-8
SPL & Impedance vs Frequency Measurement
Dimensions
Garantie
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.
