SEAS |
W12CY001 |
W12CY001-8 |
E0021-08S |
Cone driver |
Sold by piece |
|
Brand SEAS |
Model W12CY001 |
TLHP code W12CY001-8 |
Manufacturer code E0021-08S |
||
Product type Cone driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 5 weeks
The W12CY001 is a 12cm (4,5'') cone driver developed for use as a high fidelity woofer/midrange unit. The extremely stiff, yet light cone gives tremendous bass precision and midrange detail.
Precision cast and surface treated magnesium cone coupled to a natural rubber surround showing no sign of midrange (edge) resonances.
Heavy copper rings mounted above and below the T-shaped pole piece reduce non linear and modulation distortion and increase overload margin.
An extra large magnet system for good sensitivity and transient response. Copper plating of the top and bottom plates and a solid copper phase plug, which enhance the performance of the copper rings and improve heat conduction away from the pole piece. Extremely stiff and stable injection moulded metal basket keeps the critical components in perfect alignment.
Large windows in the basket both above and below the spider reduce sound reflexion, air flow noise and cavity resonance to a minimum.
General |
|
Product type | Cone driver |
Brand | SEAS |
Reference | W12CY001 |
Product code | E0021-08S |
Informations |
|
Product manufacturer range | 12 cm, Excel, Woofer |
Nominal impedance | 8 ohm |
Dimensional category | 4.5 inch |
Frequency coverage type | Sub, Low, Midbass |
Manufacturer sensitivity | 84 dB |
Calculated sensitivity | 82.99 dB |
Nominal power handling | 70 W |
Max power handling | 200 W |
Bandwidth | 60÷3500 Hz |
Fundamental parameters |
|
Sd | 50 cm² |
Mms | 7.5 gr |
Cms | 1700 µm/N |
Rms | 0.87 kg/s |
Le | 0.43 mH |
Re | 5.6 ohm |
BL | 5.4 T.m |
Small signal parameters |
|
Fs | 45 Hz |
Qes | 0.42 |
Qms | 2.5 |
Qts | 0.36 |
Vas | 6 L |
Datas |
|
Flux density | 1.1 T |
Xmax | ±3 mm |
Calculated Xmax | ±5 mm |
Xvar, Xmech, Xlim | ±4.5 mm |
EBP | 107 Hz |
Fs / Qts | 125 Hz |
Vas * Qts² | 0.78 L |
Calculated efficiency | 0.13 % |
Weight | ~1.2 kg |
Dimensions |
|
Voice coil diameter | 1.02 inch |
Winding depth | 12 mm |
Gap height | 6 mm |
Outside diameter | 120.4 mm |
Baffle cutout diameter | 100 mm |
Depth | 71.5 mm |
Front thickness | 5 mm |
Depth after front | 66.5 mm |
Diamètre aimant (mm) | 99 mm |
Shape & Materials |
|
Front chape | Cylindrical |
Magnet type | Ferrite |
Basket masterial | Acier |
Surround shape | One roll |
Surround material | Rubber |
Cone material | Magnesium |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
* The frequency responses above show measured free field sound pressure in 0
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.