BMS |
4512ND |
4512-8 |
BMS-4512-8 |
Line-Array driver |
Sold by piece |
|
Brand BMS |
Model 4512ND |
TLHP code 4512-8 |
Manufacturer code BMS-4512-8 |
||
Product type Line-Array driver |
Sales packaging Sold by Piece |
|
If you want to purchase more than the quantity in stock, have a look at the supply time below :
Indicative average supply lead time: 39 weeks
Unique Planar Wave Design
Cost effective, high efficiency Neodymium magnet assembly
Perfect acoustical coupling of individual units to create virtually continuous line source
112 dB sensitivity 1 W / 1 m
1 kHz Crossover
Extended high frequency response up to 20 kHz
The BMS 4512ND Planar wave driver radiates a coherent planar wave front form a rectangular piston without internal diffraction for superior dispertion control and high fidelity sound. This distinctive new transducer was engineered to work with 4-inch (4" x 1") rectangular throat waveguides providing extremely high sensitivity.
The 4512ND is optimised for 10° vertical dispertion and allows a horizontal coverage from 60° to 120° depending on the waveguide used. The unique design of the 4512ND planar wave driver allows perfect acoustical coupling of individual units to create virtually continuous line source.
The BMS annular diaphragm together with the cost effective, high efficiency Neodymium magnet assembly offers an economical solution for high performance line arrays.
The ring diaphragm works similar as a wound 140 mm long ribbon diaphragm providing linear frequency response up tp 20 kHz. The unique planar wave phase plug provide a coherent planar wave front without internal diffraction.
General |
|
Product type | Line-Array driver |
Brand | BMS |
Reference | 4512ND |
Product code | BMS-4512-8 |
Informations |
|
Nominal impedance | 8 ohm |
Dimensional category | 3.5 inch, 4 inch |
Manufacturer sensitivity | 112 dB |
Nominal power handling | 80 W |
Max power handling | 160 W |
Bandwidth | 500÷20000 Hz |
Recommended min cutoff frequency | 1000 Hz |
Exit dimension | 4 x 1 inch |
Datas |
|
Flux density | 2.2 T |
Weight | ~0.96 kg |
Dimensions |
|
Voice coil diameter | 1.75 inch |
External dimensions | 85 | 107 mm |
Depth | 122 mm |
Shape & Materials |
|
Magnet type | Neodymium |
Winding material | CCAW (Copper-clad aluminium wire) |
Diaphragm former material | Kapton |
Diaphragm material | Polyester |
This system is only available for technical questions. For questions of prices, availability of products and deadline thank you to send your request by the contact page.
This product is under manufacturer's warranty. This warranty protect you for the manufacturing defaults. The warranty does not protect for abnormal use of the product.