Mundorf
€42.61 IT/piece |
![]() |
Mundorf BL71 air core coil, 18mH ±2%, 4.77ohm, 0.71mm OFC-copper wire, Ø70xH29mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality. |
Mundorf
€54.54 IT/piece |
![]() |
iCore feron coil Mundorf BS140, 8.2mH ±3%, 0.32ohm, 106x34xH34mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment.
BS140-8,20
BS140-8,20
|
Mundorf
€5.98 IT/piece |
![]() |
Mundorf L71 air core coil, 0.39mH ±2%, 0.52ohm, 0.71mm OFC-copper wire, Ø30xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L71-0,39
L71-0,39
|
Mundorf
€13.37 IT/piece |
![]() |
Mundorf H125 ferrite core coil, 0.82mH ±3%, 0.1ohm, 1.25mm OFC-copper wire, Ø35xH25mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H125-0,82
H125-0,82
|
Mundorf
€73.66 IT/piece |
![]() |
Mundorf BS180 feron core coil, 3.9mH ±3%, 0.14ohm, 1.8mm wire OFC-copper 99.99% with backed varnish wire, feron core (iCore), 106x36xH36mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
€11.54 IT/piece |
![]() |
Mundorf L140 air core coil, 0.18mH ±2%, 0.11ohm, 1.40mm OFC-copper wire, Ø58xH18mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L140-0,18
L140-0,18
|
Mundorf
€59.69 IT/piece |
![]() |
Mundorf BL180 air core coil, 1.5mH ±2%, 0.28ohm, 1.80mm OFC-copper wire, Ø70xH59mm, with backed varnish wire
BL180-1,5
BL180-1,5
|
Mundorf
€20.42 IT/piece |
![]() |
Mundorf CFC18 air copper foil coil, 0.56mH ±2%, 0.35ohm, 11.5x0.07mm OFC-copper wire, Ø47xH18mm, with backed varnish wire
La bobine série CFC est une self à air constituée d’un enroulement de feuille de cuivre OFC 99.99% séparé par une feuille d’isolation polypropylène de 0.02 mm. La partie centrale est percée pour la fixation.
CFC18-0,56
CFC18-0,56
|