Mundorf
€59.69 IT/piece |
![]() |
Mundorf BL100 air core coil, 12mH ±2%, 2.14ohm, 1.00mm OFC-copper wire, Ø77xH28mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality. |
Mundorf
€11.87 IT/piece |
![]() |
Mundorf LL45 litz wire air core coil, 0.1mH ±2%, 0.11ohm, 7x0.45mm OFC-copper wire, Ø40xH20mm, with backed varnish wire
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL45-0,10
LL45-0,10
|
Mundorf
€8.97 IT/piece |
![]() |
Mundorf BL100 air core coil, 0.15mH ±2%, 0.17ohm, 1.00mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL100-0,15
BL100-0,15
|
Mundorf
€26.48 IT/piece |
![]() |
Mundorf BH180 aronit core coil, 0.56mH ±3%, 0.05ohm, 1.80mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH180-0,56
BH180-0,56
|
Mundorf
€34.20 IT/piece |
![]() |
Mundorf BH180 aronit core coil, 1.5mH ±3%, 0.09ohm, 1.80mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH180-1,5
BH180-1,5
|
Mundorf
€9.18 IT/piece |
![]() |
Air core coil Mundorf L71, 3mH ±2%, 1.63ohm, Ø20xL40mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L71-3,00
L71-3,00
|
Mundorf
€16.15 IT/piece |
![]() |
Mundorf CFC16 air copper foil coil, 0.15mH ±2%, 0.12ohm, 17x0.07mm OFC-copper wire, Ø37xH24mm, with backed varnish wire
La bobine série CFC est une self à air constituée d’un enroulement de feuille de cuivre OFC 99.99% séparé par une feuille d’isolation polypropylène de 0.02 mm. La partie centrale est percée pour la fixation.
CFC16-0,15
CFC16-0,15
|
Mundorf
€7.70 IT/piece |
![]() |
Mundorf BL71 air core coil, 0.39mH ±2%, 0.52ohm, 0.71mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-0,39
BL71-0,39
|