Mundorf
€6.07 IT/piece |
Mundorf BL71 air core coil, 0.15mH ±2%, 0.31ohm, 0.71mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-0,15
BL71-0,15
|
Mundorf
€9.32 IT/piece |
Mundorf L71 air core coil, 1.5mH ±2%, 1.11ohm, 0.71mm OFC-copper wire, Ø40xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L71-1,50
L71-1,50
|
Mundorf
€12.54 IT/piece |
Mundorf H100 ferrite core coil, 1.8mH ±3%, 0.18ohm, 1.00mm OFC-copper wire, Ø35xH25mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H100-1,8
H100-1,8
|
Mundorf
€15.29 IT/piece |
Mundorf BL125 air core coil, 0.39mH ±2%, 0.2ohm, 1.25mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL125-0,39
BL125-0,39
|
Mundorf
€75.53 IT/piece |
iCore feron coil Mundorf BS140, 22mH ±3%, 0.52ohm, 130x39xH39mm
Mundorf's BS series uses a solid 99.99% OFC copper round conductor stabilized by varnish, wrapped around a rod-shaped iron-silicon alloy core. Each end of the stick is fitted with a hole for attachment. |
Mundorf
€20.42 IT/piece |
Mundorf L140 air core coil, 0.56mH ±2%, 0.2ohm, 1.40mm OFC-copper wire, Ø58xH22mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L140-0,56
L140-0,56
|
Mundorf
€59.69 IT/piece |
Mundorf BL180 air core coil, 1.5mH ±2%, 0.28ohm, 1.80mm OFC-copper wire, Ø70xH59mm, with backed varnish wire
BL180-1,5
BL180-1,5
|
Mundorf
€20.42 IT/piece |
Mundorf CFC18 air copper foil coil, 0.56mH ±2%, 0.35ohm, 11.5x0.07mm OFC-copper wire, Ø47xH18mm, with backed varnish wire
La bobine série CFC est une self à air constituée d’un enroulement de feuille de cuivre OFC 99.99% séparé par une feuille d’isolation polypropylène de 0.02 mm. La partie centrale est percée pour la fixation.
CFC18-0,56
CFC18-0,56
|