Mundorf
€102.75 IT/piece |
Mundorf VL390 air core coil, 0.12mH ±2%, 0.01ohm, 3.90mm OFC-copper wire, L89xH61xZ76mm, with vaccum impregnated wire
VL390-0,12
VL390-0,12
|
Mundorf
€115.58 IT/piece |
Mundorf VLCU15 paper air copper foil coil, 4.7mH ±2%, 0.78ohm, 22x0.07mm OFC-copper wire, Ø97xH30mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU15-4,7
VLCU15-4,7
|
Mundorf
€16.20 IT/piece |
Mundorf BH125 ferrite core coil, 0.82mH ±3%, 0.1ohm, 1.25mm OFC-copper wire, Ø35xH25mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH125-0,82
BH125-0,82
|
Mundorf
€128.48 IT/piece |
Mundorf VN300 feron core coil, 1mH ±5%, 0.02ohm, 3.00mm OFC-copper wire, L96xH86xZ84mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN300-1,0
VN300-1,0
|
Mundorf
€188.48 IT/piece |
Mundorf VN180 feron core coil, 33mH ±5%, 0.34ohm, 1.80mm OFC-copper wire, L106xH93xZ87mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance. |
Mundorf
€22.20 IT/piece |
Mundorf CFC14 air copper foil coil, 0.12mH ±2%, 0.08ohm, 28x0.07mm OFC-copper wire, Ø38xH34mm, with backed varnish wire
CFC14-0,12
CFC14-0,12
|
Mundorf
€25.13 IT/piece |
Mundorf H100 aronit core coil, 10mH ±3%, 0.64ohm, 1.40mm OFC-copper wire, Ø51xH51mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance. |
Mundorf
€204.85 IT/piece |
Mundorf BL180 air core coil, 12mH ±2%, 0.9ohm, 1.80mm OFC-copper wire, L105xH79xZ93mm, with backed varnish wire
|