Mundorf
€428.48 IT/piece |
Mundorf VL236 air core coil, 18mH ±2%, 0.74ohm, 2.36mm OFC-copper wire, L151xH106xZ120mm, with vaccum impregnated wire
|
Mundorf
€55.42 IT/piece |
Mundorf VLCU18 paper air copper foil coil, 3.3mH ±2%, 1.1ohm, 11.5x0.07mm OFC-copper wire, Ø82xH18mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU18-3,3
VLCU18-3,3
|
Mundorf
€18.75 IT/piece |
Mundorf P100 ferrite pipe core coil, 2.7mH ±3%, 0.53ohm, 1.00mm OFC-copper wire, Ø45xH30mm
Mundorf's P series is halfway between the L and H series, with a ferrite core (or aronit for larger models) to find a compromise between low internal resistance, small footprint and price. Ideal in car-audio or sound system.
P100-2,7
P100-2,7
|
Mundorf
€34.20 IT/piece |
Mundorf BH140 aronit core coil, 3.9mH ±3%, 0.22ohm, 1.40mm OFC-copper wire, Ø51xH51mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH140-3,9
BH140-3,9
|
Mundorf
€222.75 IT/piece |
Mundorf VN390 feron core coil, 2.2mH ±5%, 0.02ohm, 3.90mm OFC-copper wire, L106xH93xZ87mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN390-2,2
VN390-2,2
|
Mundorf
€77.03 IT/piece |
Mundorf VT180 feron core coil, 1.5mH ±3%, 0.09ohm, 1.80mm OFC-copper wire, L84xH60xZ60mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT180-1,5
VT180-1,5
|
Mundorf
€171.30 IT/piece |
Mundorf CFC14 air copper foil coil, 8.2mH ±2%, 0.86ohm, 28x0.07mm OFC-copper wire, Ø109xH34mm, with backed varnish wire
CFC14-8,20
CFC14-8,20
|
Mundorf
€59.85 IT/piece |
Mundorf VL300 air core coil, 0.22mH ±2%, 0.04ohm, 3.00mm OFC-copper wire, Ø70xH59mm, with vaccum impregnated wire
VL300-0,22
VL300-0,22
|