Mundorf
€119.85 IT/piece |
![]() |
Mundorf VSCU12 feron core copper foil paper coil, 5.6mH ±3%, 0.17ohm, 1.98mm OFC-copper wire, L130xH65xZ65mm, with vaccum impregnated wire
VSCU12-5,6
VSCU12-5,6
|
Mundorf
€85.58 IT/piece |
![]() |
Mundorf VN140 feron core coil, 3.3mH ±5%, 0.14ohm, 1.40mm OFC-copper wire, L84xH76xZ70mm, with vaccum impregnated wire
The N coil range has been especially developed for low frequency applications for which maximum performance fidelity, tonal neutrality and the smallest possible internal resistance are of primary importance.
VN140-3,3
VN140-3,3
|
Mundorf
€308.48 IT/piece |
![]() |
Mundorf VL390 air core coil, 0.82mH ±2%, 0.06ohm, 3.90mm OFC-copper wire, L123xH89xZ108mm, with vaccum impregnated wire
VL390-0,82
VL390-0,82
|
Mundorf
€59.85 IT/piece |
![]() |
Mundorf VLCU12 paper air copper foil coil, 0.27mH ±2%, 0.09ohm, 44x0.07mm OFC-copper wire, Ø50xH53mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU12-0,27
VLCU12-0,27
|
Mundorf
€9.83 IT/piece |
![]() |
Mundorf BH71 ferrite core coil, 1.2mH ±3%, 0.25ohm, 0.71mm OFC-copper wire, Ø26xH25mm, with backed varnish wire
MCoil Drum-Core backed varnish coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
BH71-1,2
BH71-1,2
|
Mundorf
€33.30 IT/piece |
![]() |
Mundorf VSCU15 feron core copper foil paper coil, 0.15mH ±3%, 0.04ohm, 1.40mm OFC-copper wire, L84xH24xZ24mm, with vaccum impregnated wire
VSCU15-0,15
VSCU15-0,15
|
Mundorf
€205.58 IT/piece |
![]() |
Mundorf VT300 feron core coil, 2.7mH ±3%, 0.06ohm, 3.00mm OFC-copper wire, L130xH100xZ106mm, with vaccum impregnated wire
The Mundorf T-series uses a round 99.99% OFC solid copper conductor, wrapped around a glass-fiber reinforced plastic backing, which is placed on an iron-silicon alloy structure to enhance the magnetic field. The T series is particularly suitable for filtering woofers in a precise and powerful way.
VT300-2,7
VT300-2,7
|
Mundorf
€205.58 IT/piece |
![]() |
Mundorf CFC10 air copper foil coil, 1.2mH ±2%, 0.15ohm, 70x0.07mm OFC-copper wire, Ø76xH77mm, with backed varnish wire
CFC10-1,20
CFC10-1,20
|