Mundorf
€15.29 IT/piece |
Mundorf VLCU18 paper air copper foil coil, 0.1mH ±2%, 0.13ohm, 11.5x0.07mm OFC-copper wire, Ø34xH18mm, with vaccum impregnated wire
OFC copper tape coil 99.997%, 70µ thickness, insulated with a sheet of 30µ paper (Abacá Esparto) impreganted with a viscoplastic insulating resin. It is obtained a high mechanical damping of vibrations, almost without microphonic effect, even without housing. Extremely calm acoustic model and the finest micro-dynamics. This series makes it possible to move upmarket compared to the famous CFC series from Mundorf.
VLCU18-0,10
VLCU18-0,10
|
Mundorf
€63.84 IT/piece |
Air core coil Mundorf L140, 12mH ±2%, 1.35ohm, 89x76xH61mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering. |
Mundorf
€9.18 IT/piece |
Mundorf H50 ferrite core coil, 4.7mH ±3%, 1.06ohm, 0.50mm OFC-copper wire, Ø26xH25mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H50-4,70
H50-4,70
|
Mundorf
€8.23 IT/piece |
Air core coil Mundorf L50, 6.8mH ±2%, 4.7ohm, Ø20xL40mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-6,80
L50-6,80
|
Mundorf
€8.12 IT/piece |
Mundorf BL100 air core coil, 0.1mH ±2%, 0.14ohm, 1.00mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL100-0,10
BL100-0,10
|
Mundorf
€3.25 IT/piece |
Mundorf L50 air core coil, 0.1mH ±2%, 0.36ohm, 0.50mm OFC-copper wire, Ø25xH10mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L50-0,10
L50-0,10
|
Mundorf
€13.38 IT/piece |
Air core coil Mundorf L100, 2mH ±2%, 0.74ohm, Ø22xL58mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L100-2,00
L100-2,00
|
Mundorf
€19.58 IT/piece |
Mundorf LL60 litz wire air core coil, 0.12mH ±2%, 0.08ohm, 7x0.6mm wire OFC-copper 99.99% with backed varnish wire, Ø18xL58mm
MCoil Hepta Strand coils unite the tonal clarity, beauty and distortion-free performance of air core coils with the stereophonic spaciousness of tightly-wound coils, alongside the harmonious-warmth and splendid brightness of strand copper wire.
LL60-0,12
LL60-0,12
|