Mundorf
€12.74 IT/piece |
Mundorf BL140 air core coil, 0.15mH ±2%, 0.1ohm, 1.40mm OFC-copper wire, Ø40xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL140-0,15
BL140-0,15
|
Mundorf
€11.69 IT/piece |
Mundorf H50 ferrite core coil, 12mH ±3%, 1.75ohm, 0.50mm OFC-copper wire, Ø30xH25mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance. |
Mundorf
€11.54 IT/piece |
Mundorf L71 air core coil, 2.2mH ±2%, 1.39ohm, 0.71mm OFC-copper wire, Ø40xH20mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L71-2,20
L71-2,20
|
Mundorf
€123.27 IT/piece |
N250 33 mH
Zero-mH N250 Mundorf coil 33 mH
33mH ±5% ; RDC 0.22ohm ; Body N130 ; Wire Ø2.5 mm |
Mundorf
€29.82 IT/piece |
Mundorf L140 air core coil, 1.2mH ±2%, 0.31ohm, 1.40mm OFC-copper wire, Ø70xH29mm
Mundorf's L series uses a 99.99% solid OFC round copper conductor, specially developed for high quality filtering. The winding stand is made of glass fiber reinforced plastic. The L-series coil is the standard for quality passive filtering.
L140-1,20
L140-1,20
|
Mundorf
€21.77 IT/piece |
Mundorf H125 ferrite core coil, 3.9mH ±3%, 0.24ohm, 1.25mm OFC-copper wire, Ø40xH37mm
MCoil Drum-Core coils made from oxygen-free copper (OFC) round-wire have been developed for mid, low and parallel applications for which compact dimensions, a low basic distortion level as well as the lowest possible internal resistance and a reasonable value for money ratio are of key importance.
H125-3,9
H125-3,9
|
Mundorf
€6.83 IT/piece |
Mundorf BL71 air core coil, 0.27mH ±2%, 0.42ohm, 0.71mm OFC-copper wire, Ø30xH20mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL71-0,27
BL71-0,27
|
Mundorf
€20.42 IT/piece |
Mundorf BL125 air core coil, 0.68mH ±2%, 0.28ohm, 1.25mm OFC-copper wire, Ø58xH18mm, with backed varnish wire
The BL series from Mundorf uses the same coils as the L series but with the addition of a stabilization varnish considerably reducing electromagnetically induced vibrations. If your passive filter concerns a high-end speaker, the choice of a BL coil instead of an L coil is a relevant choice because it directly impacts the listening quality.
BL125-0,68
BL125-0,68
|